SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions and temperature extremes.

Key Features

• Exceptional performance superior bond strengths permit ductile solutions in high seismic areas.
• Design flexibility improved sustained load performance at elevated temperature.
• Jobsite versatility can be specified for all base material conditions when in-service temperatures range from -40F (-40C) to 176F (80C).
• Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
• Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
• Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
• With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas.
• Low-odor formulation.
• Manufactured in the USA using global materials.
• During the installation of SET-3G, when the correct installation processes are followed, there is no performance difference between water-saturated concrete, water-filled holes, or submerged concrete.
• For use with potable water.

Mix Ratio/Type 1:1 epoxy Mixed Color Gray Base Materials Concrete and masonry cracked and uncracked Base Material Conditions Dry, water-saturated, water-filled and submerged Anchor Type Threaded rod or rebar Substrate Installation Temperature 40F (4C) to 100F (38C) In-Service Temperature Range -40F (-40C) to 176F (80C) Storage Temperature 45F (7C) and 90F (32C) Shelf Life 24 months Volatile Organic Compound (VOC) 2 g/L

Applications

• Mass Timber / Cross-Laminated Timber
• Seismic (New Construction)
• Water / Wastewater Facilities
• Concrete Cracked
• Seismic Retrofit